Approx. Rs 1,500 / Kilogram
Lubrication for control and pressure plug valves, water softener and faucet valves.
Sealant for vacuum and pressure systems.
Sealant for outdoor equipment (also shipboard) subject to
washing and harsh environmental exposure: meters, electrical service entrance and underground connections.
Damping medium for dash pots in electrical and electronic equipment.
Used as an anti-stick and a sealant for transformer gasket and equipment enclosures. It prevents gaskets from sticking to metal and resists weathering and water washout.
Rubber and plastic O-rings, gaskets and seals.
HOW TO USE
GP 171-1 Compound can be applied by hand, specially designed automated equipment brushing or wiping. Certain designs of grease guns may seize up; test prior to use.
A thinner consistency can be achieved by dispersing in solvents such as xylene, mineral spirits and methyl ethyl ketone.
GP 171-1 Compound should not be applied to any surface which will be painted or finished. Such coatings may not adhere to the silicone-treated surface. If contaminated by a silicone coating, parts can be wiped or washed with solvent, washed with detergent, or immersed in an alcoholic potassium hydroxide solution and then rinsed in clear water before painting.
GP 171-1 Compound is not greatly affected by mineral oils, vegetable oils or air. It is generally resistant to dilute acids and alkaline and to most aqueous solutions. Because each application may vary in chemical composition, pressure, flow velocity, re-lubrication requirements and equipment design, it is recommended that the silicone compound be tested before adopting for regular use.
Compound may cause temporary discomfort when in direct contact with eyes. In case of eye contact, flush eyes with water.
Product Safety Information:
Product Safety information required for safe use is not included in this document. Before Handling read product and material safety data sheets and container labels for safe use. The material safety data sheet is available on request.
This product is neither tested nor represented as suitable for medical or pharmaceutical uses.
Silicone laboratory Samples (SLM) is development products. Therefore, we cannot at present give any binding assurance of constant properties or of continuous supplies in future.
Gayatri Polychem DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Approx. Rs 800 / Kilogram
We will contact you soon !
K. P. Yadav
(Chairman & Managing Director)
Gayatri Polychem Private Limited
Waliv, Vasai East, Mumbai,